Set LED surface-mounted spotlight with remote control Adria black 3W dimmable IP44 1-12 pieces
This beautiful LED surface-mounted spot has a height of only 14 mm! As a result, this small surface-mounted LED spotlight can be used in many different places. These surface-mounted LED spots are suitable for use in dry and humid areas, as the spots are waterproof IP44. This also makes them excellent for use in the kitchen above the countertop. By using high-quality CREE brand LED chips and a reliable driver, you can enjoy this surface-mounted spotlight set for a long time. Indeed, its expected lifetime is 50,000 hours. The Led spots consume only 3 watts, saving you a lot of energy compared to halogen spots, up to 90%!
Built-on spots with remote control
With this set of built-in spots, you do not need to connect a separate LED dimmer. In fact, the spotlights can be controlled by remote control. This allows you to switch the spotlights on and off and moreover, the surface-mounted spotlights can be dimmed. The spots remember which dimming mode was last used when the spots are switched on. This set is ideal if you don’t have the option of pulling wire or don’t want to use an LED dimmer. For example, these dimmable surface-mounted spotlights are often used under a veranda and in the kitchen.
The remote control has several buttons. In addition to the on/off buttons, you will find a night button to run the Luminous flux at 5% light output. The middle round button is used to set the dimming speed. Around it, you will find buttons for both stepwise and infinitely dimming. An explanation of the rest of the buttons can be found in the manual under downloads. Furthermore, the driver operates on RF signal. This also makes it possible to control several sets separately. Also, you don’t have to point the remote control at anything, which you have to do with an infrared remote control.
Connecting surface-mounted spotlight set black
This plug & play set comes with 1 driver with a junction box to which several spots can be connected. A 5-metre wire with connector is attached to each spotlight, which can easily be inserted into the connection box of the driver. These wires can be easily clicked into the junction box. This way, you only need to conceal one driver above the ceiling and there can be up to 5 metres between the spotlights and the driver. Should you have no place above the ceiling, for example, the long cables also allow you to place the driver in a completely different location. The wire between the spotlights and the driver is 5 metres, so you can also put the driver elsewhere if it does not fit above the ceiling. If necessary, the wire can also be easily shortened to 10 cm. The driver can be connected directly to 230V on one side. On the other side is the junction box to which the spotlights are connected. The dimensions of the driver are 107 x 43 x 23 mm (length x width x height), while the dimensions of the junction box are 51 x 31 x 17 mm. 1 to 12 spots can be connected to the driver.The cable from the surface-mounted LED spotlight to the driver is on the side of the spotlight, so no extra installation depth is needed for the cable.
LED surface-mounted spotlights 3W dimmable
These surface-mounted LED spots are easy to dim without any hum. Also, the dimming is completely stepless, which has a nice effect. The dimmable LED surface-mounted spotlights can be dimmed with the included remote control. The beam is 120 degrees which is about the same as the beam of halogen spots (g4).In addition to black, this set of Led spotlights is also available in white and in silver. This product comes with a 3-year warranty. Should a spotlight fail within the warranty period, you will receive a new one from us immediately.