LED recessed spotlight set 3 pieces Vivaro black 5W dimmable IP54 dim-to-warm

This attractive LED recessed spotlight is suitable for all rooms, so the recessed spotlight with a low recess depth can be used in dry areas such as in the living room and kitchen. The LED recessed spots are also suitable for damp areas such as the bathroom or under the roof, because the spots are waterproof IP54. Because the installation depth is very low (23 mm), the spots can also be used in ceilings where there is very little space. The color of the recessed spots is dim-to-warm (1800K – 2700K). This means that the color becomes warmer when the spot is dimmed. Each LED recessed spot has a driver which is included. The height of the driver is equal to the height of the spot, so it fits wherever the spot fits. Because a driver is used, the spots work on 230V. You can connect as many spots as you want, they can be connected in parallel. The dimensions of the driver are 95 x 40 x 23 mm (length x width x height). The cable from the LED recessed spot to the driver is on the side of the spot, so that no extra installation depth is required for the cable. This set consists of 6 separate LED recessed spots black dim-to-warm, each with a separate driver.< h2>Dimmable LED recessed spotlights

These LED recessed spotlights can be dimmed very well without any buzzing. The dimming is also completely stepless, which has a nice effect. The dimmable LED recessed spots can be dimmed with our trailing-edge LED dimmer. The color fastness of the Led spots is CRI >97, which means that the colors are displayed very well. This makes these LED recessed spots also suitable for use in shops and showrooms where high color fidelity is important. This spot is capable of becoming warmer in light color when dimmed. At full setting, the light color is warm white (2700K) and at fully dimmed setting, this gradually changes to flame white (1800K). This imitates the color as with halogen spots.

Installation recessed spots

In addition to black, this type of spot is also available in white and in stainless steel. The recess to be cut must be at least 75 mm. The diameter of the outer edge is 85 mm and the installation depth is 23 mm. Do you currently have a recess larger than 85 mm or is the existing hole not completely round? Then you can use our black spacer rings. These seal holes up to 120 mm. The spots must be connected in parallel, for this you can use the 3-fold welding clamp and 2-core cable. This product comes with a 5-year warranty. If a spot becomes defective within the warranty period, you will immediately receive a new one from us.